Cisco Cisco Aironet 1200 Access Point 技术参考

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

Implementing the Cisco SWAN Framework

Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide

OL-6217-01

To configure the necessary credentials on the CiscoWorks WLSE follow these steps:

Step 1

Log into the CiscoWorks WLSE.

Step 2

Navigate to Devices > Discover. Select Device Credentials on the left-hand side table of contents (see
Figure 9).

Step 3

Select SNMP Communities on the left-hand side table of contents (see Figure 9).

Step 4

In the form, enter the appropriate SNMP credentials. Consult the CiscoWorks WLSE online-help for
details on SNMP credential entry syntax.

Figure 9

CiscoWorks WLSE SNMP Community Entry Screen

Step 5

Select Device Credentials > Telnet/SSH User/Password from the table of contents on the left-hand
side (see Figure 10).

Step 6

Enter the appropriate Telnet or SSH credentials for logging in to the managed access points for
configuration (see Figure 10). Consult the CiscoWorks WLSE online help for details on Telnet or SSH
credentials entry syntax.