Cisco Cisco ONS 15216 DWDM System 安装指南
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Unpacking and Installing the Cisco ONS 15216
Three-Component Bay Assembly
(15216-ILA-BAY)
Three-Component Bay Assembly
(15216-ILA-BAY)
Cisco ONS 15216 Three-Component Bay Assembly Overview
The Cisco ONS 15216 three-component bay assembly includes a pre-wired GMT fuse and alarm panel
and two Cisco ONS 15216 EDFA2s. Also included on the assembly are two vertical fiber ducts, and two
2.38-inch vertical extenders and extender bases.
and two Cisco ONS 15216 EDFA2s. Also included on the assembly are two vertical fiber ducts, and two
2.38-inch vertical extenders and extender bases.
This guide describes how to unpack and install the Cisco ONS 15216 three-component bay assembly.
Because it is a complete system, installation simply requires you to remove the unit from the shipping
pallet, move the unit into place, secure it, and supply power and ground attachment. Refer to the Cisco
ONS 15216 user documentation for component-specific installation and replacement procedures.
Because it is a complete system, installation simply requires you to remove the unit from the shipping
pallet, move the unit into place, secure it, and supply power and ground attachment. Refer to the Cisco
ONS 15216 user documentation for component-specific installation and replacement procedures.
shows a three-component bay assembly.
This guide includes the following sections:
•
•
•
•
•
–
–
–
•
•
–
–
•