Cisco Cisco Prime IP Express 8.3 技术参考
The DHCP server or DHCP failover pair associated with
this configuration.
this configuration.
(0) required
The DnsUpdateConfig object associated with this configuration.
dns-servers
required
The DNS server or HA pair associated with
this configuration.
this configuration.
The update-acl to apply to zones referenced by the
DnsUpdateConfig in this map. If this attribute is set, then the
value (if any) of the dns-update-policy-list attribute is ignored.
If neither attribute is set, then a simple update-acl will be
constructed enabling just the dhcp-servers to perform dns updates,
using the IP address(es) of the single DHCP server or failover pair,
and, if specified, the server-key from the DnsUpdateConfig referenced
in the dns-config attribute.
DnsUpdateConfig in this map. If this attribute is set, then the
value (if any) of the dns-update-policy-list attribute is ignored.
If neither attribute is set, then a simple update-acl will be
constructed enabling just the dhcp-servers to perform dns updates,
using the IP address(es) of the single DHCP server or failover pair,
and, if specified, the server-key from the DnsUpdateConfig referenced
in the dns-config attribute.
(obj(0))
The list of DNS update policies to apply to zones referenced by the
DnsUpdateConfig in this map. If the attribute dns-update-acl
is set, then this attribute is ignored.
If neither attribute is set, then a simple update-acl will be
constructed enabling just the dhcp-servers to perform dns updates,
using the IP address(es) of the single DHCP server or failover pair,
and, if specified, the server-key from the DnsUpdateConfig referenced
in the dns-config attribute.
DnsUpdateConfig in this map. If the attribute dns-update-acl
is set, then this attribute is ignored.
If neither attribute is set, then a simple update-acl will be
constructed enabling just the dhcp-servers to perform dns updates,
using the IP address(es) of the single DHCP server or failover pair,
and, if specified, the server-key from the DnsUpdateConfig referenced
in the dns-config attribute.
name
The name of this managed DNS update configuration.
tenant-id
Identifies the tenant owner of this object.
dns-view
view - Controls and configures DNS Views in the DNS Authoritative
and Caching servers
and Caching servers
NOTE: The dns-view command is a synonym for view command.
Synopsis
view <name> create <attribute>=<value>
view <name> delete [-force]
view <name> show
view <name> get <attribute>
view <name> set <attribute>=<value>
view <name> unset <attribute>
view list
view listnames
view listbrief
view <name> delete [-force]
view <name> show
view <name> get <attribute>
view <name> set <attribute>=<value>
view <name> unset <attribute>
view list
view listnames
view listbrief
Description
The view command is used to control and manage DNS Views for the DNS
servers. The DNS servers must be reloaded for changes to take effect.
servers. The DNS servers must be reloaded for changes to take effect.
Examples
nrcmd> view MyView create
nrcmd> view MyView set acl-match-clients=10.11.0.0/16
nrcmd> view MyView set acl-match-clients=10.11.0.0/16