Cisco Cisco Prime IP Express 8.3 技术参考
are configured, the IPv6 addresses will be used.
mclt
(5m-1w) default = 60m
Sets the maximum client lead time in seconds. This attribute
controls how far ahead of the backup server that you can make
the client lease expiration. You must define this value on both
the main and backup servers, and make sure the value is
identical on both servers.
controls how far ahead of the backup server that you can make
the client lease expiration. You must define this value on both
the main and backup servers, and make sure the value is
identical on both servers.
name
Names a failover pair.
safe-period
default = 4h
Controls the safe period, in seconds. It does not have to be
the same on both main and backup servers. It only has meaning
if use-safe-period is enabled.
the same on both main and backup servers. It only has meaning
if use-safe-period is enabled.
Associates a scope template with a specified failover pair.
tenant-id
Identifies the tenant owner of this object.
default = enabled
Controls whether a server can enter PARTNER-DOWN state without
an operator command. If disabled, a server never enters
PARTNER-DOWN without an operator command.
an operator command. If disabled, a server never enters
PARTNER-DOWN without an operator command.
group
group - Configures a named group of administrators
Synopsis
group <name> create [<attribute>=<value>]
group <name> delete
group list
group listnames
group listbrief
group <name> show
group <name> set <attribute>=<value> [<attribute>=<value> ...]
group <name> get <attribute>
group <name> unset <attribute>
group <name> delete
group list
group listnames
group listbrief
group <name> show
group <name> set <attribute>=<value> [<attribute>=<value> ...]
group <name> get <attribute>
group <name> unset <attribute>
group <name> enable <attribute>
group <name> disable <attribute>
group <name> disable <attribute>
Description
The group command configures the specified group of administrators.
Administrator groups are used to associate an admin to one or
more roles that control access to operations and data.
Administrator groups are used to associate an admin to one or
more roles that control access to operations and data.
Examples
Status
See Also