Cisco Cisco Prime Optical 9.8 开发者指南
Cisco Prime Optical 9.8 GateWay/CORBA Programmer Reference Guide
OL-29218-01
473
For descriptions of EVC provisioning and inventory interfaces, see the following sections:
•
•
4.1.2 Connectionless Port Termination Point
A Connectionless Port Termination Point (CPTP) is a potential port capability for connectionless
technologies. A CPTP is not a new object, but it is a logical entity of a piece of equipment and
supports a connectionless client layer. A CPTP is a grouping of potential FPs on the server layer.
The FPs are the clients of a CPTP connected using MFD.
technologies. A CPTP is not a new object, but it is a logical entity of a piece of equipment and
supports a connectionless client layer. A CPTP is a grouping of potential FPs on the server layer.
The FPs are the clients of a CPTP connected using MFD.
A CPTP is created as a Physical Termination Point (PTP) if the port is an external port and if it
does not support encapsulation and link aggregation. CPTP is created as a Floating Termination
Point (FTP) if the port is an internal encapsulation port and if it supports encapsulation and link
aggregation. A CPTP on an MFD can be either a PTP or an FTP.
does not support encapsulation and link aggregation. CPTP is created as a Floating Termination
Point (FTP) if the port is an internal encapsulation port and if it supports encapsulation and link
aggregation. A CPTP on an MFD can be either a PTP or an FTP.
ConnectionlessPort is a boolean layered parameter that identifies termination points (TPs) as
CPTPs at connectionless layers; for example, Ethernet. For an Ethernet client layer, a CPTP
corresponds to an IEEE bridge port, which can either be a UNI or an NNI.
CPTPs at connectionless layers; for example, Ethernet. For an Ethernet client layer, a CPTP
corresponds to an IEEE bridge port, which can either be a UNI or an NNI.
The role played by CPTP for its connectionless client layer is stored in the “PortTPRoleState”
layered parameter, which is associated to the PTP/FTP object. The “PortTPRoleState”
parameter can assume the following values:
layered parameter, which is associated to the PTP/FTP object. The “PortTPRoleState”
parameter can assume the following values:
• unassigned CPTP—The initial role of a CPTP is unassigned. If CPTPs are automatically
created, they are created as unassigned CPTPs when the equipment that supports the port
is plugged into the NE. In this role, the CPTP cannot carry any traffic.
is plugged into the NE. In this role, the CPTP cannot carry any traffic.
• assigned CPTP—An unassigned CPTP becomes an assigned CPTP when it is associated to an
MFD through a management operation. In this role, the CPTP cannot carry any traffic
because the MFD is not associated to an FD.
because the MFD is not associated to an FD.
• fdInternal CPTP—An assigned CPTP becomes an fdInternal CPTP when the MFD is
associated to an FD. An unassigned CPTP becomes an fdInternal CPTP when it is assigned to
an MFD that is already associated to an FD. In this role, the potential client FPs of the CPTP
can be used as internal points of the route of a Flow Domain Fragment (FDFr) and can carry
traffic.
an MFD that is already associated to an FD. In this role, the potential client FPs of the CPTP
can be used as internal points of the route of a Flow Domain Fragment (FDFr) and can carry
traffic.
• fdEdge CPTP—An fdEdge CPTP is the same as an fdInternal CPTP. In this role, the CPTP acts
as an edge in the FD.
For descriptions of CPTP provisioning and inventory interfaces, see the following sections:
•
•