Cisco Cisco Evolved Programmable Network Manager 2.0 安装指南

80

TCP

PnP (via HTTP 
protocol).

Yes

Cisco EPN Manager does not support the PnP feature. You should 
disable this traffic in the network firewall.

To disable:

From the web GUI, choose Administration > Settings > System 
Settings, then choose General > Server.

Under HTTP Forward, choose Disable.

As the Cisco EPN Manager CLI admin user, enter the following 
commands to apply the settings and shut down the PnP gateway 
(enter the commands in this sequence):

162

UDP

To receive 
SNMP traps from 
network devices.

No

—

443

TCP

For browser access 
to the 
Cisco EPN Manager 
server via HTTPS.

No

—

514

UDP

To receive syslog 
messages from 
network devices.

No

—

1522

TCP

For High 
Availability (HA) 
communication 
between active and 
standby Cisco EPN 
Manager servers.

Used to allow Oracle 
JDBC traffic for 
Oracle database 
synchronization.

Yes

If at least one Cisco EPN Manager server is not configured for HA, 
this port is automatically disabled.

2021

TCP

To distribute images 
to devices using FTP.

No

—

8082

TCP

For the HA Health 
Monitor web 
interface (via 
HTTP).

Used by primary and 
secondary servers to 
monitor their health 
status via HTTP.

No 

(If 

HA 

configured)

—

8087

TCP

To update software 
on the HA 
secondary backup 
server (uses HTTPS 
as transport).

No

—