Cisco Cisco MGX 8250 8800 Series FRSM-T1 E1 Service Module 参考指南
Cisco Prime Network Analysis Module Command Reference Guide
Page 25
cdp enable
To enable the Cisco Discovery Protocol (CDP) on the NME-NAM, use the cdp enable command.
To disable CDP on the NME-NAM, use the no form of this command.
To disable CDP on the NME-NAM, use the no form of this command.
cdp enable
no cdp enable
Note
This command is not valid for NAM-1 or NAM-2 devices, the Cisco NAM 2200
Series appliances, or NAM Virtual Blades.
Series appliances, or NAM Virtual Blades.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Usage Guidelines
This command is supported only on the NME-NAM-80S and NME-NAM-120S.
Examples
This example shows how to enable CDP:
root@localhost.cisco.com#
cdp enable
root@localhost.cisco.com#
Related Commands