Cisco Cisco PowerVu D9190 Conditional Access Manager 数据表
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 4
Features
●
Fast switching time based on scheduled or dynamic tuning (through a button push)
●
Flexible channel-by-channel switching
●
Easy-to-manage schedule that uses imported tuning events (Excel spreadsheet)
●
Dual-redundant power supplies
●
Capacity for one or more ASI cards, each with three ASI outputs
●
Fifteen GPI contact sensors per GPI module
●
Maximum 250 GPI contact sensors
●
Support for up to 5000 event groups per LEC or PNC
●
Support for up to 32 event group assignments per receiver
●
Support for up to 32 event groups per tuning event
●
Event definition file import
●
Backup and restore capability
●
Soft-button trigger capability
●
Warm-standby redundancy support
Specifications
Table 1 lists specifications for the Cisco Live Event Controller. Note that the LEC server is provided with the
system; all other computers are optional. An additional Ethernet switch is required when using more than one GPI
module.
Table 1.
Product Specifications
Functions
Features
Transport Input
DVB-ASI output
4 ASI outputs
Connector
BNC
Impedance
75 ohms
TS packet length
188 B
ASI bitrate
213 Mbps
Power Requirements
AC power
110/220 VAC
Ordering Information
Table 2 provides ordering information for the Cisco Live Event Controller.
Table 2.
Ordering Information
Description
Part Number
LEC System (primary and backup)
PNC-LEC-SYSTEM
Primary Live Event Controller
PNC-LEC-PRI=
Backup (warm standby) Event Controller
PNC-LEC-WSTBY=
Live Event Controller GUI
LPNC-LEC-GUI=