Cisco Cisco D9824 Advanced Multi Decryption Receiver 安装指南

 

234 

OL-29015-01 

Proceed as follows to set up SNMP information: 
1  From the user interface of the D9824, choose System Settings > IP Settings > 

SNMP. The SNMP page is displayed. 

 

2  In the Read Only Community String and the Read Write Community String 

fields, enter public (default) or custom string. Set the password to read/write 
data from a device and to display diagnostic traps/alarms. This is used when 
communicating with a device within an SNMP environment. To set a custom 
community string, enter an alphanumeric character string up to 31 alphanumeric 
characters in length identifying the password for the device. 
Note: The community string is case-sensitive. 

3  In the System Name, System Location, and System Contact fields, enter the 

system name, location, and contact information of the D9824 receiver. The 
system information is sent to the MIB browser, if applicable. The MIB Browser is 
a third party software used to manage SNMP requests. For more information, 
contact Cisco customer support. 

4  Click Apply.