Cisco 1 GHz Surge-Gap Reverse Window Taps 安装指南
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Chapter 2 Installing the Tap/Passive
To Install the Tap/Passive in a Pedestal
Follow these steps to install tap/passive in a pedestal.
1. Using a 3/8-in. wrench, remove the strand bolt and strand clamp from the
1. Using a 3/8-in. wrench, remove the strand bolt and strand clamp from the
housing.
2. Mount the housing to the pedestal-mounting bracket using the strand bolt. Use
the strand clamp as a spacer, if necessary.
3. Using a 3/8-in. wrench, tighten the strand bolt from 30 in-lb to 40 in-lb (3.4 Nm
to 4.5 Nm).
4. Using a 3/16-in. hex-head driver or 3/16-in. straight blade screwdriver, loosen
the two seizure screws inside the housing.
18
OL-31976-01