Cisco Cisco Content Delivery Engine 250 安装指南
2 IPMI Firmware Upgrade Process
There are three processes for the IPMI firmware update:
- Using the Linux Yafuflash utility, section 2.1
- Using a bootable USB stick, Section 2.2
- Using the CDE250’s dedicated IPMI Ethernet port, Section 2.3
- Using a bootable USB stick, Section 2.2
- Using the CDE250’s dedicated IPMI Ethernet port, Section 2.3
2.1 IPMI Firmware Upgrade Process using the Yafuflash
utility at the Linux console
a) Download the proper IPMI FW update files:
- For VDS-TV these are contained in the ipmi303l.zip downloaded from the “Download
Link for IPMI FW v3.03 for VDS-TV Application” link contained in FN #63883:
o Unzip ipmi303l.zip to a temporary folder.
- For VDS-IS these are contained in the vdsis-ipmi303l.zip downloaded from the
“Download Link for IPMI FW v3.03 for VDS-IS Application” link contained in
FN#63883:
FN#63883:
o Unzip vdsis-ipmi303l.zip to a temporary folder..
- For VQE these are contained in the IPMI303l.zip downloaded from the “Download Link
for IPMI FW v3.03 for VDS-IS Application” link contained in FN#63883:
o Unzip IPMI303l.zip to a temporary folder.
a) Copy “libipmi.so.1”, “ipmiup.sh”, “Yafuflash”,” X8DAH303.ima”, and “ipmitool-1.8.14-
1.x86_64.rpm” from the temporary directory to the target server, using /tmp or some
other directory
other directory
b) At the target server run the following command:
o chmod 555 ipmiup.sh
o ipmiup.sh
o ipmiup.sh
This bash file will do the following:
Copy “libipmi.so.1” to the /lib directory
Run "ldconfig" command to config the libipmi.so.1 library
Install the ipmitool rpm "rpm -ihv ipmitool-1.8.14-1.x86_64.rpm"
Run the following commands:
o "ipmitool raw 0x30 0x70 0x0b 0x00"
o "Yafuflash -info -full -cd X8DAH303.ima"
o "Yafuflash -info -full -cd X8DAH303.ima"
These commands will take approximately 10 minutes to complete.
c) The IPMI FW update is now complete