Cisco Headend System Release 2.5
1-8
Distributed BFS Plant Configuration
738185 Rev B
ATM and ASI Process Overview
Regardless of the particular ATM or ASI configuration you use, the basic process for
setting up a distributed BFS is the same. In each case, you will perform the following
tasks.
1.
Configure the emulated MUX device.
2.
Configure the secondary BFS QAM device.
3.
Add the sessions to the secondary BFS QAM device.
4.
Configure the system for CVT for the secondary BFS QAM.
Note: You will complete some additional steps to configure OSM automux if
Note: You will complete some additional steps to configure OSM automux if
you are using non-overlapping frequencies, different program numbers, or
both.