Cisco Headend System Release 2.5 用户指南
5-8
Managing Application Sets
4011043 Rev B
Edit an Application Set, Continued
6.
Enter the following information on the Edit Application Attributes Page.
Application
Name
The name of the application set. This is a
modifiable drop down list. You can select the name
of an existing application set to overwrite it when
you import this one, or you can choose a new name
to create a new application set
Description
A description of the application set
Bits per Sec
The recommended bit rate for this application set
Load at Root
A check box to indicate whether to load the
application into the root of the object carousel or
into its own directory below the root directory.
When an application set is not loaded at the root,
the application set is placed in its own directory
(named after the Application Name) of the object
carousel service gateway. The base directory
attribute of the application signaling is also
modified to reflect the new location
Note: Typically, you should not load OCAP
Note: Typically, you should not load OCAP
application sets at the root. Each set should have an
independent file system in its own directory.
7.
Click the OK button to save the changes to the application set.