Cisco Headend System Release 2.5 安装指南
78-4003191-01 Rev B
Initial Installation of RNCS Software
1-5
Configure the ALOM Port
Configuring the ALOM Port of the Sun Fire V240 Server
Now that you have successfully connected the laptop computer to the Sun Fire V240
server and logged on, follow these instructions to configure the ALOM port.
1.
At the sc> prompt, type setsc if_network true and then press Enter.
Result: One of the following results occurs:
•
Result: One of the following results occurs:
•
If you have never before set the admin password for this server, the
system responds with a message similar to the following:
Warning: the setsc command is being ignored because the password
for admin has not been set.
Setting password for admin.
New password:
•
If the system detects that the admin password for this server has
previously been set, then the network management port of the Sun Fire
V240 server becomes functional.
2.
Did the system display the “setting password” message described in the
first bullet of step 1?
•
•
If yes, follow these instructions.
a) Type the new admin password and then press Enter.
a) Type the new admin password and then press Enter.
Result: The Re-enter new password prompt appears.
b) Retype the new admin password and then press Enter.
c) Type setsc if_network true and then press Enter.
c) Type setsc if_network true and then press Enter.
Result: The network management port of the Sun Fire V240 server
becomes functional.
•
If no, go to step 3.
3.
Type setsc netsc_dhcp false and then press Enter.
Result: This command prevents the Dynamic Host Configuration
Result: This command prevents the Dynamic Host Configuration
Protocol (DHCP) from obtaining the network configuration.
4.
Type setsc netsc_ipaddr [IP address] and then press Enter.
Notes:
•
Notes:
•
Substitute the IP address of the network management port of the Sun
Fire V240 server for [IP address].
•
The network administrator can help you determine the IP address.
Result: This command establishes the unique IP address of the network
management port.