Cisco Headend Digital Broadband Delivery System
Chapter 13 Transfer Your Services Portal Configuration
138
78-745238-01 Rev D
Place Copied Configuration Files on a Different
Headend
After you copy your Services Portal configuration files, place the configuration files
on the AppServer for a different headend.
Placing Copied Files on a Different Headend
1 Insert a disk into the floppy drive on the AppServer for the headend to which
you are copying the configuration.
2 Open an xterm window on the AppServer.
3 Type the following and press Enter:
3 Type the following and press Enter:
volcheck -v
A message stating the media was found appears. This message confirms that the
A message stating the media was found appears. This message confirms that the
system can read from and copy to the floppy disk.
4 Type the following and press Enter:
tar xvf/floppy/floppy0/spData.tar
Important: In the command above, a space precedes xvf.
The files from the disk are copied to the AppServer. An output similar to the
Important: In the command above, a space precedes xvf.
The files from the disk are copied to the AppServer. An output similar to the
following shows that the files were copied.
5 Type the following and press Enter:
floppy0/;eject
A message stating that the disk can be manually ejected appears.
A message stating that the disk can be manually ejected appears.
6 Click OK and eject the floppy disk.