Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split 安装指南
Reconfiguring Reverse Signal Routing
OL-29643-02
129
4x2 Reverse Configuration Module with Auxiliary Reverse RF Injection
(6-Port OIB)
(6-Port OIB)
Signals from the left side of the amplifier (Ports 1 and 2/3) are combined and routed
to a reverse transmitter (XMTR 1). Signals from the right side of the amplifier (Ports
4 and 5/6) are combined and routed to a different reverse transmitter (XMTR 2). An
RF signal from an external source can optionally be injected and coupled with the
reverse RF inputs from Ports 3/6 and routed to Transmitter 1.
Note: This module is typically used with a 6-port optical interface board since there
is no transmitter 3 or 4 position.
Install the transmitter that is dedicated to Ports 1 and 2/3 in XMTR 1.
Install the transmitter that is dedicated to Ports 4 and 5/6 in XMTR 2.
to a reverse transmitter (XMTR 1). Signals from the right side of the amplifier (Ports
4 and 5/6) are combined and routed to a different reverse transmitter (XMTR 2). An
RF signal from an external source can optionally be injected and coupled with the
reverse RF inputs from Ports 3/6 and routed to Transmitter 1.
Note: This module is typically used with a 6-port optical interface board since there
is no transmitter 3 or 4 position.
Install the transmitter that is dedicated to Ports 1 and 2/3 in XMTR 1.
Install the transmitter that is dedicated to Ports 4 and 5/6 in XMTR 2.
The following diagram illustrates reverse path signal flow in this configuration
module.
module.