Cisco Headend System Release 3.2 安装指南
Install the Alarm Manager Server Software
78-745262-01Rev C
55
4 Are you installing the Alarm Manager server software for the first time?
If yes, click Create OM. The following message appears:
This will destroy all data for the EMS system and exit this application. Are
This will destroy all data for the EMS system and exit this application. Are
you certain. Yes No
If no (you are upgrading an existing version of Alarm Manager software), go
to step 8.
5 Click Yes.
Results:
The Alarm Manager database initializes in about 30 seconds to 1 minute.
All open windows, except the xterm window, close.
6 Type ./EMS and then press Enter. The DBDS EMS Server Administration Login
window reopens.
Important: Be sure to type the dot before typing /EMS.
Important: Be sure to type the dot before typing /EMS.
7 Follow these instructions to log in to the Alarm Manager server.
a In the Login field, type System and then press Tab.
b In the Password field, type System.
c Click OK.
Result: The DBDS EMS Server Administration window reopens and displays
b In the Password field, type System.
c Click OK.
Result: The DBDS EMS Server Administration window reopens and displays
the message The EMS is currently stopped.
8 Click Start on the DBDS EMS Server Administration window. The Alarm
Manager server starts.
9 Wait until the window displays the message The EMS is currently STARTED,
and then click Exit to close the window. A confirmation message appears.
Note: Closing the window does not stop the Alarm Manager server software.
Note: Closing the window does not stop the Alarm Manager server software.
10 Click yes on the confirmation message. The DBDS EMS Server Administration
window closes.
11 In the xterm window, type exit and then press Enter to log out as root user.