Cisco Headend Digital Broadband Delivery System 维护手册
Chapter 2 Verify Your EAS Equipment Configuration
8
4004455 Rev G
Overview
Before you can configure the EAS on the DNCS, you must verify that your third-
party EAS equipment is configured and performing correctly. This chapter provides
parameters that allow the EAC to communicate with the DNCS. This chapter also
provides procedures to verify the performance of your specific third-party EAC and
EAS, so that you can achieve optimum system performance when receiving and
sending Emergency Alert Messages (EAMs).
party EAS equipment is configured and performing correctly. This chapter provides
parameters that allow the EAC to communicate with the DNCS. This chapter also
provides procedures to verify the performance of your specific third-party EAC and
EAS, so that you can achieve optimum system performance when receiving and
sending Emergency Alert Messages (EAMs).
Important: Some configuration and troubleshooting information is provided for
third-party equipment (such as MegaHertz, Trilithic, Monroe, and Frontline).
However, you should always refer to the documentation that comes with that
equipment when you configure or troubleshoot that equipment. The scope of this
information is to make sure that equipment can communicate with our equipment,
not to be a comprehensive configuration and troubleshooting guide for third-party
equipment.
third-party equipment (such as MegaHertz, Trilithic, Monroe, and Frontline).
However, you should always refer to the documentation that comes with that
equipment when you configure or troubleshoot that equipment. The scope of this
information is to make sure that equipment can communicate with our equipment,
not to be a comprehensive configuration and troubleshooting guide for third-party
equipment.
This document provides configuration instructions for a centralized EAS. If you
have a distributed EAS system, refer to the Distributed EAS on the Regional Control
System, Configuration and Troubleshooting Guide (part number 4002342).
have a distributed EAS system, refer to the Distributed EAS on the Regional Control
System, Configuration and Troubleshooting Guide (part number 4002342).
If you have a system using tru2way (formerly OCAP) instead of SARA, refer to
Configure the DNCS for tru2way EAS Installation and Operation Guide (part number
4019780).
Configure the DNCS for tru2way EAS Installation and Operation Guide (part number
4019780).