Cisco Headend Digital Broadband Delivery System 安装指南
Appendix D
Configuring DTACS on an SR 5.0 System
140
4042225 Rev A
Verify User Ownership and Group Permissions
Important:
All steps in this procedure take place in the root xterm window of the DTACS
server.
server.
The examples in the following steps may differ from the output on your system;
however, they should be similar.
however, they should be similar.
Do not change the group ID for any group.
Perform this procedure to verify that the ownership for dncs, dtacs, and dncsSSH
users are correct on the DTACS server and also to verify that the dncs user belongs
to the dtacs group and the dtacs user belongs to the dncs group.
1
users are correct on the DTACS server and also to verify that the dncs user belongs
to the dtacs group and the dtacs user belongs to the dncs group.
1
Type the following command and press Enter to verify directory ownership for
the dncsSSH, dncs, and dtacs users.
the dncsSSH, dncs, and dtacs users.
ls –ltr /export/home
Example: Output should be similar to the following example:
# ls –ltr /export/home
.
.
.
drwxr-x--- 3 dncsSSH dtacs 512 Feb 22 15:30 dncsSSH
drwxr-x--- 6 dncs dncs 512 Feb 23 07:25 dncs
drwxr-xr-x 7 dtacs dtacs 512 Mar 3 10:19 dtacs
2 Type the following command and press Enter to verify that the dncs user
belongs to the dtacs group.
groups dncs
Example: Output should be:
dncs dtacs
3 Type the following command and press Enter to verify that the dtacs user
belongs to the dncs group.
groups dtacs
Example: Output should be:
dtacs dncs