Cisco Headend System Release 2.7 安装指南
Pre-Installation System Checks
4023373 Rev B
3
Pre-Installation System Checks
This section provides procedures for the following system checks to be completed
before you begin installing SARA Server software. The following list summarizes
these checks. The remainder of this chapter provides procedures for these checks.
1 Identify and locate the version of SAIapsrv currently installed so that you have it
before you begin installing SARA Server software. The following list summarizes
these checks. The remainder of this chapter provides procedures for these checks.
1 Identify and locate the version of SAIapsrv currently installed so that you have it
readily available. Having this item at hand is helpful in the unlikely event that
you experience a problem installing the software and need to restore the version
of software that is currently installed.
you experience a problem installing the software and need to restore the version
of software that is currently installed.
2 Run the Doctor Report and correct any problems it may indicate.
3 Verify that your DBDS is stable.
4 Suspend the billing system and, if necessary, third-party (non-SA) applications.
5 Find out when the IPG collector will run so that you can ensure IPG data is
3 Verify that your DBDS is stable.
4 Suspend the billing system and, if necessary, third-party (non-SA) applications.
5 Find out when the IPG collector will run so that you can ensure IPG data is
correctly updated after the software is completely installed.
Identify and Locate the Version of SAIapsrv Currently Installed
Follow this procedure to identify the current version of SAIapsrv package and locate
it so it is readily available in the unlikely event you experience a problem installing
the software. Should you experience a problem and need to restore the version of
software currently installed on your system, you will need to reinstall the SAIapsrv
package.
it so it is readily available in the unlikely event you experience a problem installing
the software. Should you experience a problem and need to restore the version of
software currently installed on your system, you will need to reinstall the SAIapsrv
package.
Note: See Roll Back the Software (on page 46) for instructions on reinstalling this
software package.
1 Locate the current Maintenance CD (3.1.14).
2 In an xterm window on the SARA Server type pkginfo –l SAIapsrv and press
software package.
1 Locate the current Maintenance CD (3.1.14).
2 In an xterm window on the SARA Server type pkginfo –l SAIapsrv and press
Enter. The current SARA Server version displays.
3 Write the current SARA Server version here: __________________
4 Backup the DNCS and Application Server file systems and database. The
4 Backup the DNCS and Application Server file systems and database. The
Application Server file system backup will be needed in the unlikely event that
you experience a problem installing the software and need to restore the
previous version of software and database. For assistance, go to Back Up the File
Systems (on page 5) and Back Up the Database (on page 5).
you experience a problem installing the software and need to restore the
previous version of software and database. For assistance, go to Back Up the File
Systems (on page 5) and Back Up the Database (on page 5).
5 Go to Run the Doctor Report (on page 4).