Cisco Headend System Release 2.5 安装指南
Chapter 3 Using the Common Download Player
22
4017307 Rev C
7 In the Add File Input window, use the following steps to add the new Common
Download stream.
a Type the .ts file name in the Input Name field.
b Select the .ts file name from the File Path drop down list.
c Enter the host vendor's recommended file bit rate for the file (typically
a Type the .ts file name in the Input Name field.
b Select the .ts file name from the File Path drop down list.
c Enter the host vendor's recommended file bit rate for the file (typically
500000).
d Click OK.
8 After the screen has refreshed to show the new Input stream with the logical
name given, use the following steps to remap the PID.
a Double-click PID 2048 to open the Manage PID window.
a Double-click PID 2048 to open the Manage PID window.
b In the Mapped PID field, enter the new PID, plus 1. Use the information you
recorded in Gather Information to Build the TSBroadcaster Session (on page
c Click Include to save your changes and close the Manage PID window.
9 Verify that the PID shows up in the outputs as the remapped PID.
Note: Only one transport stream file can be played out per PID, as only one PID
is currently supported.