Cisco Headend System Release 2.5 安装指南
Chapter 3 SR 2.7/3.7/4.2 SP4 Installation Procedures
58
4042389 Rev A
Enable the RNCS (Optional)
If you have an RNCS and have followed these instructions fully, complete the RNCS
upgrade process now. Complete steps 25 through 35 in Chapter 2 of the RNCS
Installation and Upgrade Instructions For SR 2.7/3.7 or SR 4.2 (part number 4012763).
upgrade process now. Complete steps 25 through 35 in Chapter 2 of the RNCS
Installation and Upgrade Instructions For SR 2.7/3.7 or SR 4.2 (part number 4012763).
After the RNCS Upgrade
After the RNCS upgrade, complete the following tasks:
1 Back up RNCS files.
1 Back up RNCS files.
a Type cd /dvs/dncs/bin and press Enter.
b Type cp -p tsbroadcasterclientapi.jar tsbroadcasterclientapi.jar.SP4 and
b Type cp -p tsbroadcasterclientapi.jar tsbroadcasterclientapi.jar.SP4 and
press Enter.
c Type cp -p TSBroadcasterClient.jar TSBroadcasterClient.jar.SP4 and press
Enter.
2 Put the preSP4 files back in place.
a Type cp -p tsbroadcasterclientapi.jar.preSP4 tsbroadcasterclientapi.jar and
press Enter.
b Type cp -p TSBroadcasterClient.jar.preSP4 TSBroadcasterClient.jar and
press Enter.
3 Compare /export/home/informix/etc/onconfig to
/export/home/informix/etc/onconfig.preSP4 to ensure that nothing has
changed. If something has changed, enter the following commands:
a Type cp -p /export/home/informix/etc/onconfig
changed. If something has changed, enter the following commands:
a Type cp -p /export/home/informix/etc/onconfig
/export/home/informix/etc/onconfig.SP4 and press Enter.
b Type cp -p /export/home/informix/etc/onconfig.preSP4 cp
/export/home/informix/etc/onconfig and press Enter.