Cisco Headend Digital Broadband Delivery System 安装指南
Disable the SAM Process on Rovi and MDN/ODN Systems
4038415 Rev A
65
Disable the SAM Process on Rovi and MDN/ODN
Systems
If the site you are upgrading uses the Rovi Corporation application server, you need
to disable the SAM process before you restart the system components. Complete the
following steps to disable the SAM process.
to disable the SAM process before you restart the system components. Complete the
following steps to disable the SAM process.
Notes:
If the site you are upgrading does not use the Rovi Corporation application
server, skip this procedure and go to the next procedure in this chapter.
server, skip this procedure and go to the next procedure in this chapter.
You should be logged on to the DNCS as dncs user.
1 In the DNCS section of the DNCS Administrative Console Status window, click
Control. The DNCS Monitor window opens.
2 From an xterm window on the DNCS, type dncsControl and then press Enter.
The DNCS Control window opens.
3 Type 4 (for Define/Update Grouped Elements) and then press Enter. The
window updates to list a series of element groups.
4 Type 14 (for saManager) and then press Enter. The window updates to list the
elements in the group.
5 Type 1 (for /dvs/dncs/bin/saManager) and then press Enter. The first in a
series of confirmation messages appears.
6 Press Enter at each conformation message to accept the default setting until a
message about cpElmtExecCtrlStatus appears. In total, you should see about six
confirmation messages.
confirmation messages.
7 At the cpElmtExecCtrlStatus message, type 2 (for Disabled) and then press Enter.
A confirmation message appears.
8 Type y (for yes) and then press Enter. The message Element Definition was
Modified appears.
9 Follow the on-screen instructions to exit from the DNCS Control window.