Cisco Headend System Release 2.5 安装指南

 

4038415 Rev A 

51 

 

Complete these steps to install the SR 2.8.2/3.8.2/4.3.2 DNCS GUI and WUI 
software. 

Note:  It should take no more than 15 minutes to install the DNCS GUI and WUI 
software. 
1  Insert the CD labeled similar to DNCS GUI / WUI  into the CD drive of the 

DNCS. The system automatically mounts the CD to /cdrom within 30 seconds. 

2  Type the following command and press Enter. A list of the mounted filesystems 

appears. 

Note:  The presence of /cdrom in the output confirms that the system correctly 
mounted the CD. 

3  Type the following command and press Enter. The /cdrom/cdrom0 directory 

becomes the working directory. 

4  Type the following command and press Enter. The system displays DNCS GUI 

and WUI package information and the Are you SURE you want to continue? 
message. 

5  Type y and then press Enter. The software installs on the DNCS. 
6  After the upgrade has completed, follow these instructions to eject the CD. 

a  Type cd  / and then press Enter. 
b  Type eject  cdrom and then press Enter. 

7  Check the log file for errors. Go to Install Additional Software if the log file 

indicates that the DNCS GUI and WUI software installed without error. 
Notes: 

 

The installation log file is in the /var/sadm/system/logs directory of the 
DNCS. 

 

The log file for the DNCS GUI is called SAIgui_[version #]_install.log. 

 

The log file for the DNCS WUI is called SAIwebui_[version #]_install.log. 

 

Call Cisco Services for assistance if the log files reveal any errors.