Cisco Headend System Release 2.7 用户指南
Send Instant Hits
4025012 Rev B
29
Send Instant Hits
Sometimes, when you stage a device, one of the following might occur:
The Entitlement Agent might not display.
The EMM count may not increment to the required number.
The Sub Expire date is not set correctly.
In these cases, you might need to send an instant hit to the device. This section
provides the procedures for sending instant hits to Tuning Adapters.
Sending an Instant Hit to a Tuning Adapter
1 From the DNCS Administrative Console, click the DNCS tab.
2 From the DNCS Administrative Console, select the Network Element
2 From the DNCS Administrative Console, select the Network Element
Provisioning tab.
3 Click DHCT. The DHCT Provisioning Screen opens.
4 On the DHCT Provisioning screen, select Open.
5 Type the MAC Address, IP address, or serial number of the Tuning Adapter
4 On the DHCT Provisioning screen, select Open.
5 Type the MAC Address, IP address, or serial number of the Tuning Adapter
and click Continue. The Set Up DHCT screen opens.
6 From the Set Up DHCT screen, click the Secure Services tab.
7 Click DHCT Instant Hit.
7 Click DHCT Instant Hit.