Cisco Model 6385 BTSC Stereo Encoder (NTSC) 安装指南
Adding and Deleting USRM Service Groups Using Configuration Files
78-4021139-01 Rev D
381
2 Select the desired USRM under Primary SDV Server. Enter the mini-carousel
multicast destination IP address. Enter the service group maximum bandwidth.
3 Recommended optional step: In a DNCS 4.2.0 system, if GQAMs are used in the
USRM's SDV service group, enter the QAM carriers into the Selected Ports
window. While this information is not directly provisioned into the USRM by
the DNCS, allocating the carriers here eliminates the potential that an operator
will inadvertently "reuse" them as a VOD carrier by taking them out of the
Available Ports list.
Note: For a system running DNCS release 4.2.1 or greater, step 3 is also
Note: For a system running DNCS release 4.2.1 or greater, step 3 is also
applicable to any third party QAMs that are being used/shared by the DNCS
and USRM.
4 Click Save Service Group to save your changes.