Blue Coat PS900-L000M 产品宣传页

Copyright © 2009 Blue Coat Systems, Inc. All rights reserved worldwide. No part of this document may be reproduced by any means nor translated to any electronic medium without the written consent of Blue Coat Systems, Inc. Specifications 
are subject to change without notice. Information contained in this document is believed to be accurate and reliable, however, Blue Coat Systems, Inc. assumes no responsibility for its use, Blue Coat is a registered trademark of Blue Coat 
Systems, Inc. in the U.S. and worldwide. All other trademarks mentioned in this document are the property of their respective owners. v.DS-PacketShaper-v4b-0809

Blue Coat Systems, Inc.

www.bluecoat.com

Corporate Headquarters

Sunnyvale, CA  USA // +1.408.220.2200

EMEA Headquarters

Hampshire,  UK // +44.1252.554600

APAC Headquarters

Hong Kong // +852.3476.1000

IP Flows (TCP/Other IP)*

5,000/2,500  

30,000/15,000 

40,000/20,000

200,000/100,000

300,000/150,000

900,000/360,000      

Classes

256

512

1,024

1,024

2,048

5,000

Dynamic Partitions

**

1,024

1,024

10,000

20,000

20,000

Static Partitions

128

256

512

512

1,024

5,000

Shaping Policies

256

512

1,024

1,024

2,048

5,000

Max # of Matching Rules

640

2,562

2,562

5,120

5,000

12,500

IP Hosts*

5,000

15,000

20,000

150,000

200,000

400,000

Active Tunnels

10

15

30

100

1,000

N/A

Monitoring Only

Yes

Yes

Yes

Yes

Yes

Yes

Link Speeds with  
Shaping Options (bps)

512 Kbps
2 Mbps
—
—

2 Mbps
6 Mbps
10 Mbps
—

2 Mbps
6 Mbps
10 Mbps
45 Mbps

10 Mbps
45 Mbps
100 Mbps
200 Mbps

100 Mbps
200 Mbps
310 Mbps
1 Gbps

100 Mbps
200 Mbps
310 Mbps
1 Gbps

Compression***

2 Mbps

10 Mbps

20 Mbps

45 Mbps

155 Mbps

N/A

Network Interfaces (in and out)

Copper: 10/100 Mbps  

Copper: 10/100/1000 

Mbps  

Copper: 10/100/1000 

Mbps  

Copper: 10/100/1000 

Mbps  

Copper: 10/100/1000 Mbps

Fiber: 1000 Mbps

Copper: 10/100/1000 Mbps

Fiber: 1000 Mbps

LAN Expansion Module (max 2)       Backup fail-to-wire 

pair built in  

N/A

Copper: 10/100/1000 

Mbps

Fiber SFP

Copper: 10/100/1000 

Mbps

Fiber SFP

Copper: 10/100/1000 Mbps

Fiber SFP

Copper: 10/100/1000 Mbps

Fiber SFP

Interface Pairs

 2

1

1 + LEM option

1 + LEM option

1 + LEM option

1 + LEM option

Out of Band Management

Through backup ports       Yes

Yes

Yes

With LEM

With LEM

Console Port

All have RS-232 (AT-compatible) with male DB-9 connectors

Height

1U (1.75 in/4.45 cm)         1U (1.75 in/4.45 cm)         2U (3.5 in/8.89 cm)

2U (3.5 in/8.89 cm)

2U (3.5 in/8.89 cm)

2U (3.5 in/8.89 cm)

Width

8.66 in (22.00 cm)

17 in (43.18 cm)

17.35 in (44.07 cm)

17.35 in (44.07 cm)

17.31 in (43.97 cm)

17.31 in (43.97 cm)

Depth

9.68 in (24.60 cm)

14 in (35.56 cm)

16 in (40.64 cm)

16 in (40.64 cm)

20.25 in (51.43 cm)

20.25 in (51.43 cm)

Weight

4.50 lbs (2.05 kg)

14 lb (6.35 kg)

18.04 lb (8.18 kg)

20.48 lb (9.29 kg)

33 lb (14.97 kg)

33 lb (14.97 kg)

Power Supply

100/240 VAC;

50/60 Hz, 2 A      

100/240 VAC;

50/60 Hz, 2.5 A

100/240 VAC;

50/60 Hz, 2.5 A

100/240 VAC;

50/60 Hz, 2.5 A

100/240 VAC;

50/60 Hz, 6 A

100/240 VAC;

50/60 Hz, 6 A

Dual, Redundant Load Sharing

No

No

No

Yes; Hot-swappable

Yes; Hot-swappable

Yes; Hot-swappable

Interoperability

XML, XML and CGI APIs, SNMP MIB, SNMP event traps, HP OpenView, infoVista, CA eHealth, Aprisma Spectrum, Micromuse Netcool

Device Management

Console access, Web browser interface, Telnet CLI, SNMP Blue Coat MIB and MIB-II support

Safety

IEC 60950-1; EN 60950-1+ A11, CAN/CSA-C22 2 No, 60950-1:03; UL 60950-1:03; EN 60825-1,-2 Class 1 Laser

EMC/EMI

AS/NZS 3548 Class A; AS/NZS 4252.1; ICES-003 Class A; EMC Direct B9/336/EEC; EN 300 386 v1.3.1: 2001 Telecom EMC standard; EMC Directive 73/23/EEC;

EMC Directive 93/6B/EEC; EN 55022: 1998 Class A; EN 61000-3-2: 1995_A1(98) + A2(98), & prA1 4(00); EN 61000-3-3:1:1995; EN 55024:1998; VCCI:2002 Class A; 

KN55022 Class A; KN6100-4-2,3,4,5,6,8,11; GOST-R 60950-2002; GOST-R 5131B.22,.24-99; FCC 47 CFR part 15, subpart B Class A; CNS 13438 Class A

Note: Not all capacity specifications can be maximized simultaneously
*  PacketShaper can support more hosts and flows; these figures represent ideal maximums for producing optimal results; numbers are rounded up or down to the nearest thousand. These 

maximums represent concurrent flows. Performance may vary due to the number of new flows, traffic type, traffic mix and other conditions unique to each deployment.

**  No extra partitions are specifically allocated for dynamic partitions. The 1400 Lite and 1400 have a pool of partitions to be shared between static and dynamic partitions.
***  Refers to post-compressed traffic rates - maximum compressed throughput specifications for PacketShaper are lower when compression is enabled due to the extra processing power 

required to compress traffic.

****PacketShaper 10000 has a configuration option for ISP loads. Previously, ISP editions had been offered as a separate product with unique SKU.  Now, the ISP load, which adds class capacity, 

is available as a configuration option. Note: The ISP load increase capacity for classes and flows, but does NOT provide certain features including compression and response time statistics, 

among others.