Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 用户指南

Complete these steps to add a hub to a headend.

1.

On the DNCS Administrative Console, click the DNCS tab.

2.

Click the System Provisioning tab.

3.

Click RNCS Sites. The Site Summary window opens and lists all sites in the RCS network.

4.

Click Hubs. The Hub Summary window opens.

5.

Click Add Hub. A new row containing empty fields appears in the Hub Summary window.

Tip: If you are adding several hubs at once, you may find it easier to copy information from one field,
paste it to another, and then modify the information you have pasted.

6.

Use the following fields when you manage a hub in an RCS headend.

Hub Name

The name you will use to identify this hub.

You can use up to 15 alphanumeric characters.

Example: If this hub is in Headend 1, which is in the Denver site, you might use
Dnvr_HE1_Hub1. 

Hub ID

The number you will use to identify this hub.

You can use up to eight digits. 

Important: Be sure to use a number that is consistent with the numbering
scheme used on your network map. You will not be able to modify this field later.

Headend

The headend where this hub is located.

Time Zone

The time zone used where this hub resides.

DST Zone ID

If this hub resides in an area that uses daylight saving time, select the appropriate
DST Zone ID.



For more information on DST Zone ID, see the DST Zone ID

field in 



.



To manage time correctly on your network, you must install the

Digital System Time Kit, if not installed previously. Refer to 

DBDS System

Time Installation and Maintenance Guide

 (part number 4011510) for

more information. To obtain a copy of this publication, see 

7.

Click Save. The system displays the message "Hub save completed."

8.

Click OK. The message closes and to show the Hub Summary window.

9.

Do you need to add another hub?



If yes, repeat this procedure from step 5.



If no, go to step 10.