Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 用户指南
Setting Up BFS QAM Modulator Connections in an RCS
After you set up the basic parameters for a BFS QAM modulator, complete these steps to set up the connections
between the BFS QAM modulator and the ASI card on the DNCS or RNCS/LIONN.
between the BFS QAM modulator and the ASI card on the DNCS or RNCS/LIONN.
1.
On the Set Up QAM window, click the Connectivity tab. The Connectivity window opens with an
illustration of the devices already connected to this QAM modulator.
2.
If not already selected, click to select the Input Port option in the QAM Name area.
3.
In the Connect To area, click the Headend Name arrow and select the headend in which the device
that feeds the BFS QAM resides.
4.
Click the Device Type arrow and select ASI.
5.
Continue defining connections to the ASI card by entering the following information in any order.
Click the Device Name arrow and select the name you gave the ASI card when you defined it
earlier as an MPEG source.
Click the Port Number arrow and select the port number on the ASI card that is connected to
this BFS QAM modulator.
6.
Click Apply. The system saves this information into the DNCS database.
7.
Your next step is to activate the BFS QAM modulator. Go to
.
Page 700