Cisco DNCS System Release 2.7 3.7 4.2 用户指南
Prepare MSO Logos for Export
4000820 Rev B
11
Prepare MSO Logos for Export
This section includes the procedures for placing an MSO logo into the appropriate
format to use with the LogoTool SARA export process. The dimensions of the MSO
logo must be 54 pixels x 37 pixels.
format to use with the LogoTool SARA export process. The dimensions of the MSO
logo must be 54 pixels x 37 pixels.
Note: If the MSO logo is not sized to the required dimensions, display problems may
be seen by subscribers.
be seen by subscribers.
Preparing MSO Logos
When preparing MSO logos for export to SARA, you can either create a new logo or
use an existing logo. Go to New MSO Logos (on page 11) or Existing MSO Logos (on
page 12), as needed.
use an existing logo. Go to New MSO Logos (on page 11) or Existing MSO Logos (on
page 12), as needed.
New MSO Logos
1 From the File menu, click New. The New window opens.
2 From the New window, complete the following steps to create an MSO logo.
1 From the File menu, click New. The New window opens.
2 From the New window, complete the following steps to create an MSO logo.
a From the Name box, type a name that describes the MSO logo (for example,
victory).
b Enter the appropriate dimensions in the Width and Height text boxes.
Note: The dimensions of the MSO logo must be 54 x 37 pixels.
c From the Mode file, select RGB Color.
d From the Contents field, select the appropriate background option.
e Click OK. The new file opens.
d From the Contents field, select the appropriate background option.
e Click OK. The new file opens.
3 Create your logo, as needed.
4 Click Save and save the file in a Photoshop (PSD) format.
5 Repeat steps 1–4, as needed, to create other MSO logos.
6 Keep the MSO files open and go to
4 Click Save and save the file in a Photoshop (PSD) format.
5 Repeat steps 1–4, as needed, to create other MSO logos.
6 Keep the MSO files open and go to
Export MSO Logos (on page 13).