Cisco Transaction Encryption Device (TED) IV 安装指南
About This Guide
TP-00107
ix
About This Guide
Introduction
This guide describes the Transaction Encryption Device (TED 4.0) server, details
what you need to successfully install the TED server, and provides a process
what you need to successfully install the TED server, and provides a process
overview. This guide also provides hardware installation instructions, and standard
instructions for properly powering down, powering up, and rebooting the TED
server.
server.
Purpose
Use this guide when you are completing the following tasks:
Installing a new TED 4.0 server in your network
Replacing an existing TED server with a new TED 4.0 server
Initializing a back-up TED 4.0 server
Audience
This guide provides network system administrators, DNCS/ISDS operators, and
field engineers with instructions for installing the TED 4.0 server. These
field engineers with instructions for installing the TED 4.0 server. These
administrators should have extensive working experience within their network
architecture and with using UNIX text editors.
System Requirements
Your system must have the correct DNCS/ISDS software to use the TED 4.0 in your
network. Contact Cisco
network. Contact Cisco
®
Services if you are not sure about the DNCS/ISDS software
installed on your system.
Site Requirements
To successfully install the TED 4.0 server in your headend, your site must contain
the following specifications:
An un-interruptible power supply (UPS) back-up power system
An environment that is air-conditioned with an operating temperature of 0°C
(32°F) to 55°C (131°F)
(32°F) to 55°C (131°F)
The TED 4.0 server should be located in an area with restricted security access