Cisco DNCS System Release 2.7 3.7 4.2 安装指南
Install the Application Software Platform Release onto the DNCS
78-4003052-01 Rev G
31
Install the Application Software Platform Release
onto the DNCS
This section provides instructions for installing the application platform software
release onto the DNCS and for choosing a download method.
You can install the software from either the Cisco FTP Server or you can install the
You can install the software from either the Cisco FTP Server or you can install the
software from a CD. After you install the software, you will choose a download
method that determines the next set of procedures that are necessary to complete
during the upgrade.
Note: If Cisco Services has already delivered the software to your DNCS, skip this
Note: If Cisco Services has already delivered the software to your DNCS, skip this
section, and go to Install the OS Check Table (Optional) (on page 34).
Installing the Software from Files Downloaded from the FTP Server
Depending on the device types in your system, you might need to install multiple
gzipped tar files for each device type. You must tar then install each gzipped tar file
separately, because some files might overwrite existing files in the download
directory.
Complete the following steps to install the application platform software release
Complete the following steps to install the application platform software release
onto the DNCS.
Notes:
Notes:
System components do not have to be shut down to install the software.
This procedure assumes the install_pkg package installer is located in the
/usr/sbin/ directory.
1 From the xterm window where you are logged in as root, type cd
/export/home/download.
2 Type /usr/local/bin/gzip -d [gzipped file name] and press Enter.
Example:
/usr/local/bin/gzip -d SARA_15423.tar.gz
/usr/local/bin/gzip -d SARA_15423.tar.gz
3 Repeat step 2 for each gz file you downloaded to your DNCS. Each of the files is
uncompressed into a tar file.
4 Type tar xvf [filename.tar] for a tar file from steps 2 and 3 that you need to
install.
5 Type /usr/sbin/install_pkg SAIresapp and press Enter.
Results:
The system lists the packages that will be installed.
A confirmation message appears asking you to confirm that you want to
proceed with the installation.