Cisco DNCS System Release 2.7 3.7 4.2 安装指南
Chapter 3 Phase Two - Test New Software
48
78-4003052-01 Rev G
8 Configure the fields on the Set Up DHCT OS window as follows:
Destination: Append the file name to the path shown for the destination file
name.
Example: bfs: ///osm/1419pe2b10.ver
Example: bfs: ///osm/1419pe2b10.ver
Description: Copy or enter the file name.
Example: 1419pe2b10.ver
Example: 1419pe2b10.ver
Format: Select S/W Table of Contents.
9 Click Save. If the save is successful, the DHCT OS List window opens.
Note: If the save fails, verify that the file name is listed in the OS list.
If it is listed, the file already exists on your BFS. Continue with the
installation.
If it is not listed, call Cisco Services.
10 Select File and choose New.
11 Click Browse. The Select OS File window opens.
12 Select the related _0 file from the file list.
11 Click Browse. The Select OS File window opens.
12 Select the related _0 file from the file list.
Example: 1419pe2b10_0
13 Click OK.
14 Configure the fields on the Set Up DHCT OS window as follows:
14 Configure the fields on the Set Up DHCT OS window as follows:
Destination: Append the file name to the path shown for the destination file
name.
Example: bfs: ///osm/1419pe2b10_0
Example: bfs: ///osm/1419pe2b10_0
Description: Copy or enter the file name.
Example: 1419pe2b10_0
Example: 1419pe2b10_0
Format: Select In Band File.
15 Click Save. If the save is successful, the DHCT OS List window opens.
Note: If the save fails, verify that the file name is listed in the OS list.
If it is listed, the file already exists on your BFS. Continue with the
installation.
If it is not listed, call Cisco Services.
16 Select File and choose New.
17 Click Browse. The Select OS File window opens.
18 Select the related _1 file from the file list.
17 Click Browse. The Select OS File window opens.
18 Select the related _1 file from the file list.
Example: 1419pe2b10_1
19 Click OK.