Cisco DNCS System Release 2.7 3.7 4.2 安装指南

下载
页码 51
 
78-4011510-01 Rev C 
DBDS System Time Maintenance 
4-9 
Synchronize System Component Time Settings,
 Continued 
Starting the xntpd process 
Important:  The Application Server must be running properly before you perform 
this procedure. 
Follow these steps to start the xntpd process and to synchronize Application Server 
time with the DNCS. 
1. 
Log in as a root user. 
2. 
Type cd  /etc/rc2.d and then press Enter. 
Result:  
The /etc/rd2.d directory is now the working directory.  
3. 
Type /usr/local/xntpd/ntpdate dncsatm and press Enter.  
Note:  The ntpdate dncsatm command synchronizes the Application Server 
time with the DNCS. 
4. 
Type ./S99xntpd start and then press Enter
Notes:   
• 
Be sure to type the period before typing /S99xntpd
• 
The start-up process takes approximately 15 to 30 seconds to complete. 
5. 
To verify that the Application Server is running xntpd, type 
 ps –ef | grep ntp and then press Enter
6. 
Look at the right-hand area of the xterm: App Server window. Does the 
display on your window include /usr/local/xntpd? 
 
• 
If yes, the Application Server is running xntpd. Go to step 7.  
• 
If no, contact Cisco Services for assistance. 
7. 
In the xterm window type exit and then press Enter
8. 
Repeat steps 1 through 4 of the Verifying Application Server 
Synchronization procedure, earlier in this chapter, to verify that the 
Application Server is synchronized with the DNCS.