Cisco DNCS System Release 2.7 3.7 4.2 安装指南

 

OL-31613-01 

93 

 

Important: All steps in this procedure take place in the root remote terminal window 
of the DTACS server. 

Complete the following procedure to ensure that the DTACS database successfully 
syncs with the DNCS database: 
1  In the root remote terminal window of the  DTACS server, type the following 

command and press Enter to switch to the dncs user: 

sux – dncs

  

2  Type the following command and press Enter to establish the correct DTACS 

environment: 

. /dvs/dtacs/bin/dtacsSetup

  

Note: Make sure there is a space between the period (.) and the forward slash (/). 

3  Type the following command and press Enter to verify that you can access the 

DNCS database: 

dbaccess dncsdb@dncsatmDbServer -

  

Example: Output should be similar to the following example: 

$ dbaccess dncsdb@dncsatmDbServer -

 

    Database selected

 

    > 

 

4  Press the Ctrl and c keys simultaneously to exit from the dbaccess utility. 
5  Type the following command and press Enter to initiate a synchronization of the 

DTACS database: 

dtacsdbsync –S 

 

6  Did a Dbsync Succeeded message appear at the end of the script? 



 

If yes, the synchronization was successful. Go to step 7. 



 

If no, contact Cisco Services for assistance. 

7  Click the Sys Config button on the Web UI console. The DTA Control System 

Configuration window opens. 

8  Click Sync Db to initiate the DTACS database synchronization process. 
9 

Did a DB Sync request processed successfully message appear? 



 

If yes, the synchronization was successful.  



 

If no, contact Cisco Services for assistance.