Cisco DNCS System Release 2.7 3.7 4.2 安装指南
Solaris x86 Installation
OL-31613-01
13
Solaris x86 Installation
1 Right-click the new virtual machine and choose Power > Power On.
2 Click the VM, click the Console tab and click inside the console window to gain
2 Click the VM, click the Console tab and click inside the console window to gain
focus. The Grub menu opens with the Oracle Solaris option selected by default.
3 Press e to edit.
4 Press e again to edit the kernel boot line.
5 Use the left arrow key to move the cursor back to the space that follows the word
4 Press e again to edit the kernel boot line.
5 Use the left arrow key to move the cursor back to the space that follows the word
“unix,” and type the following:
- install nowin
Important:
There is a space before and after the "-" in the new string.
There is a space that follows the word nowin.
Do not change any other settings.
6 Press Enter to return to the GNU GRUB page that shows the highlighted kernel
boot line.
7 Press Ctrl and Alt to regain control of the mouse.
8 From the toolbar, click the Floppy Disk and choose Floppy drive 1 > Connect to
8 From the toolbar, click the Floppy Disk and choose Floppy drive 1 > Connect to
floppy image on a local disk.
9 Browse to the JumpStart folder that was copied from the application DVD onto
your local disk, and double-click the .flp image.
10 Click in the Console window to regain focus.
11 Press b to boot, wait for the Solaris OS to boot, and press F2 in the Solaris
11 Press b to boot, wait for the Solaris OS to boot, and press F2 in the Solaris
Installation Program box to continue.
12 Press F2 in the Identify This System box to begin identification.
13 When prompted, choose the Region, Country, and Time Zone, and press F2 to
13 When prompted, choose the Region, Country, and Time Zone, and press F2 to
confirm. The installation resumes.
14 During installation, press Ctrl and Alt to regain the mouse.