Cisco Cisco RF Gateway 1 發佈版本通知
3
New Features
New Features
1. Socket Redundancy Enhancements
a. When the stream’s PCR PID’s bitrate goes to zero, it will be treated as
content loss and a stream switch will be initiated based on Socket
Redundancy Priorities (Port switching has higher priority than source
switching). This feature will work only for SPTS Streams with valid
PCR reference in the PMT.
Redundancy Priorities (Port switching has higher priority than source
switching). This feature will work only for SPTS Streams with valid
PCR reference in the PMT.
b. An UI option is provided to manually switch a stream to the next port
in the port pair (based on socket redundancy priorities).
c. Please refer section GbE Interface Operation Modes in RFGW-1
configuration guide at the location
http://www.cisco.com/c/dam/en/us/td/docs/video/OVP/RFGW
_1/Cisco-RF-Gateway-1-Configuration-Guide.pdf
_1/Cisco-RF-Gateway-1-Configuration-Guide.pdf
d. This is implemented using the CDETS “CSCup51508 - SRE: Manual
Stream Switching and Treat PCR zero bitrate as Content loss”
2. UDTA Enablement support.
a. This feature contains the implementation for the in band
control/PSIP/EAS support which is required in the UDTA
environment to merge the PSIP and EAS information carried over the
0x1FFB PID. Please refer section “New Field in Stream map for UDTA
enablement from V06.04.XX” in RFGW-1 configuration guide at the
location
environment to merge the PSIP and EAS information carried over the
0x1FFB PID. Please refer section “New Field in Stream map for UDTA
enablement from V06.04.XX” in RFGW-1 configuration guide at the
location
http://www.cisco.com/c/dam/en/us/td/docs/video/OVP/RFGW
_1/Cisco-RF-Gateway-1-Configuration-Guide.pdf
_1/Cisco-RF-Gateway-1-Configuration-Guide.pdf
b. This is implemented using the CDETS “CSCup09826 UDTA PSIP
EAS aggregation support “