Cisco Cisco StadiumVision Mobile Reporter 维护手册
© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Internal Information.
Page 6 of 28
Enabling a DMP to Generate Proof of Play Messages
To use proof of play, you need to enable the Syslog for the DMP and also set
the Syslog Collector IP Address. This address is typically the IP address of
the SV Director. By default, Syslog is not enabled.
the Syslog Collector IP Address. This address is typically the IP address of
the SV Director. By default, Syslog is not enabled.
To enable proof of play for a DMP:
1. Open the Management Dashboard and select the DMP(s) from the
Device List. To select multiple DMPs, enable the checkbox next to the
device name.
device name.
2. To view the Syslog settings for a selected DMP, go to the bottom of the
screen and click Syslog on the Device Settings tab.
Figure 2.
Checking Syslog Settings for the DMP
3. Select Configuration > DMP Commands > Update MIB.
4. In the Update MIB command parameters box, add the following
Name:Pair values:
init.syslog: on
init.syslog_collector: <IP address of SV Director server>
5. Click the Play button to send the command to the selected DMP(s).