Cisco Cisco StadiumVision Mobile 维护手册
© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Internal Information. Page 20 of 23
Figure 14. Setting Values for Channel Guide Parameters in the Registry
Defining a Delay Channel
If you have assigned DMPs to the delay_zone in SV Director, you can configure the
channel you want to display on the TVs controlled by the DMPs in the delay zone
during the delay event state as follows. If no channel is configured, the DMPs will
display the default channel during the delay event state.
channel you want to display on the TVs controlled by the DMPs in the delay zone
during the delay event state as follows. If no channel is configured, the DMPs will
display the default channel during the delay event state.
1. Open the event script.
2. Click the green plus sign (+) above the Ad Hoc states panel.
3. Enable the Manual transition button (the default setting).
4. Click Edit in the Ad Hoc State box.