Cisco Cisco 1 GHz GainMaker Amplifier 安装指南
2-12
Installing Trim Networks
741338 Rev D
Installing a Trim Network in a SAI
Procedure
Follow the procedure to install a trim network in a SAI module.
1.
Open the SAI housing.
2.
Open the SAI module cover.
3.
Switch the ACM to THERMAL.
4.
Record the RF output levels.
Note: The trim network location is labeled TRIM on the printed circuit
Note: The trim network location is labeled TRIM on the printed circuit
board.
5.
Pull the plug-in jumper from the module.