Cisco Compact Broadband Amplifier 93218 and 93228 安装指南
1-6
Introduction
4029501 Rev F
Power Saving Modes
Power Saving
The amplifier provides two options for reducing power consumption:
Power Saving On: If the amplifier is running at an output level below 109 dB
V,
select this mode to reduce the power consumption of the output gain blocks,
while maintaining good distortion performance.
while maintaining good distortion performance.
Single Output Mode: If only one active output is needed, this mode can be
selected, and Port 1 will be powered down.
selected, and Port 1 will be powered down.
See the following table for power reductions of two power saving modes.
Conditions
Power reduction (W)
Power saving on
3 (per port)
Single output mode
10