Cisco Cisco Prisma II EDR Receiver 安装指南
78-748705-01 Rev C
Operation Using the ICIM
3-9
ICIM Password,
Continued
Re-Entering a User Password
If more than 10 minutes have passed since your last keystroke, and you attempt to
make any changes to system parameters, the menu displays Psw Expired. If you
attempt to disable the password, the menu displays Failed, Password Not Active.
When either of these messages is displayed, you must re-enter the user password.
Follow these steps to re-enter a user password.
Follow these steps to re-enter a user password.
1.
Access the password as described in Accessing the Password Function earlier
in this section.
2.
Press the
SEL
key.
Result: User Psw/Shift Off is displayed.
3.
Press the
SHIFT
key to display Shift On. Then enter the 8 digits of the user
password, using the 0–9 number keys.
If at any time you input a digit that is incorrect or you wish to change a digit,
use the CAN (Cancel) function by pressing the
If at any time you input a digit that is incorrect or you wish to change a digit,
use the CAN (Cancel) function by pressing the
ALRM
key to delete that digit.
4.
Press the
ENTER
key.
Result: The ICIM updates the display to show if your password entry was
accepted or rejected. If the entry was accepted, you are able to return to the
MAIN menu.