Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 96 of 169
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
nsc(policy-mgr)# scope org
nsc(policy-mgr) /org # scope deviceprofile default
nsc(policy-mgr) /org/deviceprofile # set syslog EaSysPA12
nsc(policy-mgr) /org/deviceprofile* # commit-buffer
nsc(policy-mgr) /org/deviceprofile #
Setting the Timezone
You can set the timezone.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Policy Manager
SUMMARY STEPS
1. connect policy-mgr
2. scope org
3. scope deviceprofile <profile-name>
4. set timezone <zone-name>
5. commit-buffer
DETAILED STEPS
Command
Purpose
Step 1 connect policy-mgr
Example:
nsc# connect policy-mgr
Places you in the policy manager
CLI.
CLI.
Step 2 scope org
Example:
nsc(policy-mgr)# scope org
Places you in organization mode.
Step 3 scope deviceprofile
Example:
nsc(policy-mgr) /org # scope deviceprofile
default
Places you in device profile mode.
Step 4 set timezone
Example:
nsc(policy-mgr) /org/deviceprofile # set
timezone pacific
Sets the timezone.
Step 5 commit-buffer
Example:
nsc /system/backup* # commit-buffer
Commits (saves) the
configuration.
configuration.