Cisco Cisco OptoStar II Driver Amplifier 安装指南
Installing/Removing the RF Adapter Plate
To Install the RF Adapter Plate
RF adapter plate is an optional component. Users can purchase, mount and
disassemble the RF adapter plate according to their own needs. When using the
RF adapter plate, it’s required to install the plate first, and then install other
modules. Detailed installation process is shown below:
1. When using a single power supply, confirm application modules required for
disassemble the RF adapter plate according to their own needs. When using the
RF adapter plate, it’s required to install the plate first, and then install other
modules. Detailed installation process is shown below:
1. When using a single power supply, confirm application modules required for
slots 4 and 5, align with the RF port of corresponding module, install the RF
adapter into the eight-hole adapter plate, and fix them with nuts.
Note: Pay attention to the installation direction when installing the RF
adapter.
adapter into the eight-hole adapter plate, and fix them with nuts.
Note: Pay attention to the installation direction when installing the RF
adapter.
2. Use four pan-head screws to fix the eight-hole adapter plate onto the RF
adapter plate.
Note: When using dual power supplies, it’s not required to install the
eight-hole adapter plate.
Note: When using dual power supplies, it’s not required to install the
eight-hole adapter plate.
2-4
Installation
OL-29659-03