Cisco Cisco OptoStar II Driver Amplifier 發佈版本通知

下载
页码 10
 
 
 
 
 
Installation Instructions 
To Download the System Release 
Complete the following steps to get the latest firmware releases. 
1  Go to the support section of the Cisco website (
). 
Note: If you have not done so, you will need to set up an account to access the 
firmware releases. 
2  From the Support menu, choose All Downloads and then use the selection tree 
to find the appropriate products. 
The following figure shows the general layout of the software download page 
accessible from the Cisco website. 
 
 
For example, OptoStar II ICIM 3.4 firmware is listed under Products > Video > 
Access/Edge > Optoelectronics > Cisco OptoStar II Products. 
3  Download the appropriate files, depending on your needs. 
To Install the Latest Firmware 
Complete the following steps to update the firmware. 
1.  Login to the Web Client. 
2.  Under the ICIM Settings tab, click the Update ICIM Firmware button. 
3.  Click the Update button in the Update ICIM Firmware page. 
4.  Select the latest firmware file and click Open to update the firmware. 
For detailed information, see Chapter 3 of the Cisco OptoStar II Console Software 
Installation and Operation Guide, 
part number OL-29664