Cisco Cisco Prime Collaboration 10.0 安装指南
(Service Pack 1)
====================================================================
===============
====================================================================
===============
We recommend that you take a snapshot of the VMware instance before
you start the Patch installation so that you have a clean backup in
place to be used in case the installation results in errors.
you start the Patch installation so that you have a clean backup in
place to be used in case the installation results in errors.
To install the patch:
a) Download the patch cpcm-
patchbundle-10.0.0.40038-2.x86_64.tar.gz
from the Prime
Collaboration software download page.
b) Copy the patch file to the Prime Collaboration
Assurance/Analytics server under the /root directory.
Example: Use freeware sftp client like 'FileZilla'
to transfer patch file to Prime Collaboration Server and enter below
details in sftp client to connect to Prime Collaboration Server.
details in sftp client to connect to Prime Collaboration Server.
Host - sftp://<your_pc_server_ip>
Username - root
password - <your_pc_server_root_password>
Port - 26
Username - root
password - <your_pc_server_root_password>
Port - 26
c) Log into the Prime Collaboration Assurance/Analytics
server as root using ssh (port 26) and copy the patch file cpcm-
patchbundle-10.0.0.40038-2.x86_64.tar.gz
patchbundle-10.0.0.40038-2.x86_64.tar.gz
to the repository local
disk as follows
cd /root
cp cpcm-patchbundle-10.0.0.40038-2.x86_64.tar.gz /
cp cpcm-patchbundle-10.0.0.40038-2.x86_64.tar.gz /
localdisk
d) Change the user account from root to admin and configure
a repository
# su admin
admin# config t
Enter configuration commands, one per line. End
admin# config t
Enter configuration commands, one per line. End
with CNTL/Z.
admin(config)# repository local
admin(config-Repository)# url disk:
admin(config-Repository)# end
admin# show repository local
admin(config-Repository)# url disk:
admin(config-Repository)# end
admin# show repository local
e) Run the patch installation command.
admin# patch install cpcm-
patchbundle-10.0.0.40038-2.x86_64.tar.gz local
f) Confirm whether you want to save the current
configuration.
The following messages are displayed.
Generating configuration...
Saved the running configuration to startup
Saved the running configuration to startup
successfully
Initiating Application Patch installation...
Patch successfully installed.
Patch successfully installed.