Cisco Cisco D9854 Advanced Program Receiver 技术参考
3
3
Identifying the D9824 with FEC and IP Input
The following is a list of ways to identify the new D9824 unit with FEC and IP Input:
•
The rear panel TS Inputs/Outputs connector is labeled as TS instead of TS OUT on the Ethernet port, as shown below.
•
The D9824 front panel About menu (Main: About: Features) indicates the installed features.
a.
In the Features list, press up and down to scroll through the list of options.
b.
Check that the MPOIP In and MPOIP FEC features are set to Yes in the Installed menu.
•
In the D9824 web GUI, the Features/Licenses page displays the installed hardware options (System Settings > Identification
> Features/Licenses), as shown below.
> Features/Licenses), as shown below.
–
Check that the MPOIP In and MPOIP FEC features are set to Yes.