Cisco LE III Type 3 with 55 70 MHz Split (Linear Tilt) 数据表

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

• For applications where output 

levelcontrol is not required, the 
interstage is typically configured 
with a stand alone Interstage 
Equalizer (ISEQ).

• For basic output level control in 

aerial plant applications, a 
combination Thermal 
Compensator/ISEQ is available.

• For the most accurate degree of 

level control in both aerial and 
underground plant, a combination 
AGC/ISEQ is the desired option.

The High Gain Dual - RC provides
two high level outputs (bridger level)
with the ability to split one of the
outputs to feed a third output port.

23036

• 60 and 90 V AC powering capability

• 15 ampere current capacity (steady state) and 25 ampere surge survivability

• Integrated reverse amplifier, with optimized diplex filter group delay for 

forward and reverse paths

• Individual reverse input testpoints and input pads for both the Main and 

Aux reverse inputs allow optimum reverse path alignment

• Auxiliary output can be split to feed a third output port, via plug-in 

directional coupler or splitter

• Integrated, high efficiency, transformerless power supply lowers system 

operating cost

• Directional Coupler RF testpoints provide optimum accuracy

• Surge Resistant

™

Circuitry ensures hybrid protection without fuses or other 

nuisance failure-causing devices

The System Amplifier III (SAIII)
family of RF amplifiers includes a
variety of gain, output and frequency
configurations to optimally address
the various network architectures
being deployed.  All SAIII amplifier
modules offer 15 amp current
carrying capacity, and come pre-
configured with diplexers and
reverse amplifier for optimum
reverse performance.

The High Gain Dual - RC (Reverse
Conditioning) amplifier module
incorporates all of the features of the
original SAIII High Gain Dual.
Additionally, maximum flexibility in
reverse signal path alignment is
achieved via the incorporation of
individual reverse input testpoints
and pads for each of the reverse
inputs.  

The High Gain Dual - RC amplifier
module can be field configured with
a variety of standard accessory
options to meet specific
requirements.