Cisco Headend Digital Broadband Delivery System 安装指南
Chapter 1 SR 2.8.1/3.8.1/4.3.1
14
4036043 Rev B
Verify DBDS Stability
1 Complete the following steps to perform a slow and fast boot on a test DHCT
with a working return path (2-way mode).
a Boot a DHCT.
a Boot a DHCT.
Note: Do not press the Power button.
b Access the Power On Self Test and Boot Status diagnostic screen on the
DHCT and verify that all parameters, except UNcfg, display Ready. UNcfg
displays Broadcast.
displays Broadcast.
Note: The fields on this screen may take up to 2 minutes to completely
populate with data.
populate with data.
c Press the Power button on the DHCT to turn on the power and establish a
two-way network connection.
d Access the Power On Self Test and Boot Status diagnostic screen on the
DHCT and verify that all parameters, including UNcfg, display Ready.
2 Verify that you can ping the test DHCT.
3 Stage at least one new DHCT. After staging the DHCT, verify the following:
3 Stage at least one new DHCT. After staging the DHCT, verify the following:
The DHCT loaded the current client release software.
The DHCT received at least 33 EMMs (Entitlement Management Messages).
The DHCT successfully received its Entitlement Agent.
4 Verify that the Interactive Program Guide (IPG) displays 7 days of valid and
accurate data.
5 Verify the pay-per-view (PPV) barkers appear on the PPV channels correctly.
6 Verify that all third-party applications have loaded and operate properly.
7 Verify that you can purchase a VOD and/or xOD program.
8 Verify that SDV channels are available.
6 Verify that all third-party applications have loaded and operate properly.
7 Verify that you can purchase a VOD and/or xOD program.
8 Verify that SDV channels are available.