Cisco Cisco SG500-52PP 52-port Gigabit Max PoE+ Stackable Managed Switch 技术参考
Virtual Local Area Network (VLAN) Commands
78-21491-01 Command Line Interface Reference Guide
597
34
Default Configuration
N/A
Command Mode
EXEC mode
Example
The following example displays information on the source and receiver ports of
Multicast-TV VLAN 1000.
Multicast-TV VLAN 1000.
34.33 ip internal-usage-vlan
The system assigns a VLAN to every IP address. In rare cases, this might conflict
with a user requirement for that VLAN. In this case, use the ip internal-usage-vlan
Interface Configuration (Ethernet, port-channel) mode command to reserve a
different VLAN as the internal usage VLAN of an interface. Use the no form of this
command to restore the default configuration.
with a user requirement for that VLAN. In this case, use the ip internal-usage-vlan
Interface Configuration (Ethernet, port-channel) mode command to reserve a
different VLAN as the internal usage VLAN of an interface. Use the no form of this
command to restore the default configuration.
Syntax
ip internal-usage-vlan
vlan-id
no ip internal-usage-vlan
Parameters
vlan-id—Specifies the internal usage VLAN ID.
Default Configuration
No VLAN is reserved as an internal usage VLAN by default (using this command).
Command Mode
Interface Configuration (Ethernet, port-channel) mode. It cannot be configured for
a range of interfaces (range context).
a range of interfaces (range context).
switchxxxxxx#
show vlan multicast-tv vlan
1000
Source Ports
------------
gi1/1/8,
gi1/1/9
Receiver Ports
----------------------
gi1/1/1-18